4300 DISPENSE Sn63Pb37 solder paste 100g 30cc SYRINGE
4300 Sn63Pb37 Type 3 DISPENSE solder paste in a 30cc syringe is a very clever formula. In is a no clean that can be cleaned with water. One in 10 boards in the US use water wash paste because they must be clean. These are conformal coated, military, medical, industrial, microwave and companies that just don?t want residue on a Printed Circuit Board. This is the answer; it can be cleaned or not cleaned. A switch hitter and the only such formula on the market today!!!
Our price: $32.00
4300 DISPENSE Sn63Pb37 solder paste 35 g SYRINGE
4300 Sn63Pb37 Type 3 DISPENSE solder paste is a very clever formula. In is a no clean that can be cleaned with water. One in 10 boards in the US use water wash paste because they must be clean. These are conformal coated, military, medical, industrial, microwave and companies that just don?t want residue on a Printed Circuit Board. This is the answer; it can be cleaned or not cleaned. A switch hitter and the only such formula on the market today!!!
LF-4300 DISPENSE SAC305 solder paste 35 g SYRINGE
LF-4300 SAC305 Type 3 DISPENSE solder paste is a very clever formula. In is a no clean that can be cleaned with water. One in 10 boards in the US use water wash paste because they must be clean. These are conformal coated, military, medical, industrial, microwave and companies that just don?t want residue on a Printed Circuit Board. This is the answer; it can be cleaned or not cleaned. A switch hitter and the only such formula on the market today!!!
Our price: $21.50
LF-4300 SAC305 solder paste 500g JAR
LF-4300 SAC305 Type 3 PRINT solder paste is a very clever formula. In is a no clean that can be cleaned with water. One in 10 boards in the US use water wash paste because they must be clean. These are conformal coated, military, medical, industrial, microwave and companies that just don?t want residue on a Printed Circuit Board. This is the answer; it can be cleaned or not cleaned. A switch hitter and the only such formula on the market today!!!
LF-4300 Tacky Flux
LF-4300 TF is a no clean rework flux for PCB repair. It can also be used for BGA and flip chip attach. This is a very clever formula. In is a no clean that can be cleaned with water. One in 10 boards in the US use water wash paste because they must be clean. These are conformal coated, military, medical, industrial, microwave and companies that just don?t want residue on a Printed Circuit Board. This is the answer; it can be cleaned or not cleaned. A switch hitter and the only such formula on the market today!!!
? Tacky ? it stays where you put it
? No-Clean and Water Washable (one product for both processes)
Cleaned using standard aqueous cleaning systems without saponification.
? VOC (Volatile Organic Solvents) free
? Halide-free
? Flux is classified as an RELO by IPC.
? Great S.I.R. (Surface Insulation Resistance) test results (IPC)
? Low voiding
? Works well in convection and vapor phase processes
? Excellent wetting to most surfaces with low voiding
? Clear residue and low order
It is designed to reactivate the surface of metal layers and prepare them to wet to solder. It is designed to work with Tin Lead and No Lead Alloys (62/36/2, 63/37, SAC305, SAC405) that reflow in the temperature range of 220 ? 280oC. Solder reflow can be done with a soldering iron, a profiled oven, a hot plate or other technique that melts the solder in less than 1-2 minutes above liquidus.
Packaging generic 10cc syringe is standard, but cartridges, other syringe types and jars are available on request
? Tacky ? it stays where you put it
? No-Clean and Water Washable (one product for both processes)
Cleaned using standard aqueous cleaning systems without saponification.
? VOC (Volatile Organic Solvents) free
? Halide-free
? Flux is classified as an RELO by IPC.
? Great S.I.R. (Surface Insulation Resistance) test results (IPC)
? Low voiding
? Works well in convection and vapor phase processes
? Excellent wetting to most surfaces with low voiding
? Clear residue and low order
It is designed to reactivate the surface of metal layers and prepare them to wet to solder. It is designed to work with Tin Lead and No Lead Alloys (62/36/2, 63/37, SAC305, SAC405) that reflow in the temperature range of 220 ? 280oC. Solder reflow can be done with a soldering iron, a profiled oven, a hot plate or other technique that melts the solder in less than 1-2 minutes above liquidus.
Packaging generic 10cc syringe is standard, but cartridges, other syringe types and jars are available on request
LF-4300 Tacky Flux 30cc
LF-4300 TF in a 30cc syringe is a no clean rework flux for PCB repair. It can also be used for BGA and flip chip attach. This is a very clever formula. In is a no clean that can be cleaned with water. One in 10 boards in the US use water wash paste because they must be clean. These are conformal coated, military, medical, industrial, microwave and companies that just don?t want residue on a Printed Circuit Board. This is the answer; it can be cleaned or not cleaned. A switch hitter and the only such formula on the market today!!!
? Tacky ? it stays where you put it
? No-Clean and Water Washable (one product for both processes)
Cleaned using standard aqueous cleaning systems without saponification.
? VOC (Volatile Organic Solvents) free
? Halide-free
? Flux is classified as an RELO by IPC.
? Great S.I.R. (Surface Insulation Resistance) test results (IPC)
? Low voiding
? Works well in convection and vapor phase processes
? Excellent wetting to most surfaces with low voiding
? Clear residue and low order
It is designed to reactivate the surface of metal layers and prepare them to wet to solder. It is designed to work with Tin Lead and No Lead Alloys (62/36/2, 63/37, SAC305, SAC405) that reflow in the temperature range of 220 ? 280oC. Solder reflow can be done with a soldering iron, a profiled oven, a hot plate or other technique that melts the solder in less than 1-2 minutes above liquidus.
Packaging generic 10cc syringe is standard, but cartridges, other syringe types and jars are available on request
? Tacky ? it stays where you put it
? No-Clean and Water Washable (one product for both processes)
Cleaned using standard aqueous cleaning systems without saponification.
? VOC (Volatile Organic Solvents) free
? Halide-free
? Flux is classified as an RELO by IPC.
? Great S.I.R. (Surface Insulation Resistance) test results (IPC)
? Low voiding
? Works well in convection and vapor phase processes
? Excellent wetting to most surfaces with low voiding
? Clear residue and low order
It is designed to reactivate the surface of metal layers and prepare them to wet to solder. It is designed to work with Tin Lead and No Lead Alloys (62/36/2, 63/37, SAC305, SAC405) that reflow in the temperature range of 220 ? 280oC. Solder reflow can be done with a soldering iron, a profiled oven, a hot plate or other technique that melts the solder in less than 1-2 minutes above liquidus.
Packaging generic 10cc syringe is standard, but cartridges, other syringe types and jars are available on request
NC-560-LF Lead-Free No-Clean Solder Paste 500 g JAR
The NC-560-LF is a No Clean Lead Free solder paste in the most commonly seen alloy (SAC305). It is Halogen and Halide free. It prints exceptionally well, reflows in a wide range of profiles and forms nice shinny joints. The flux is defined as a RELO by IPC tests and it has great SIR results. Easy to use, light clear-residues it is a great all purpose paste.
NC-560-LF Lead-Free No-Clean Solder Paste 500 gram CARTRIDGE
The NC-560-LF is a No Clean Lead Free solder paste in the most commonly seen alloy (SAC305). It is Halogen and Halide free. It prints exceptionally well, reflows in a wide range of profiles and forms nice shinny joints. The flux is defined as a RELO by IPC tests and it has great SIR results. Easy to use, light clear-residues it is a great all purpose paste.
NCRF-420, No Clean Rework Flux 10cc SYRINGE
NCRF-420 is a no clean rework flux for PCB repair. It can also be used for BGA and flip chip attach. It is dispensable and normally comes in syringes, but can also be printing, ?doctor blade? applied or dipped.
RMA-259-HT-10/88/2 solder paste 500g JAR
RMA-259HT 10/88/2 is a solder paste designed for component manufacturing. It is an RMA and can be cleaned with solvent based cleaning solvents or Kyzen, Zestron like cleaning solutions.
Amtech?s RMA-259HT 10/88/2 is designed for printing. It reflows well and produces nicely wetted fillets.
- Designed for high temperature applications
- VOC Free, Halide Free and Non-Hydroscopic
- Wide process window
- Excellent wetting compatibility on most board finishes
- Low voiding
Amtech?s RMA-259HT 10/88/2 is designed for printing. It reflows well and produces nicely wetted fillets.
- Designed for high temperature applications
- VOC Free, Halide Free and Non-Hydroscopic
- Wide process window
- Excellent wetting compatibility on most board finishes
- Low voiding
